Spraying with an airbrush technique
Overall I am pleased with the final outcome with the 3 step spray can package. I did complete a trial and it was slightly darker than the original BMW color (mineral white) but so close that I elected to "go ahead". I sanded the scratch down well and worked the surrounding area starting with 1000 and further out a scotch pad . Roughly 4 x 6 " area total. I decanted all three colors (base. intermediate & clear) into small glass bottles and then used them for my air gun. I applied the base coat per instruction and then followed with the intermediate (metallic) and then followed up with the clear coat. All 3 colors worked very well with my basic air- gun. After completion, and 12 hours drying time for the clear coat I wet sanded with 1400 & 2200. I then applied a polishing compound and buffed it with a simple electric mini buffer. For a 1st time repair I would give it an A and if it was a bodyshop I would give it a B. Hope this helps